8
Install the tap with regard to use and aesthetics.
When drilling through the kitchen worktop or sink, before drilling, make sure
that the dimensions are suitable for installing the washers, nuts and joints
under the kitchen worktop or sink (Fig. 6). Otherwise, there is a risk that you
will carry out the drilling incorrectly.
The tube should be carefully installed between the tap and the clean water
outlet of the system.
Water connection fittings
1 Tap tube
2 Upper tap body
3 Tap handle (open/close)
4 Hub cover
5 Tap body
6 Housing sleeve
7 O-ring of the housing sleeve
8 Mounting piece
9 Plastic mounting piece
10 Plastic mounting washer
11 Washer
12 Compression nut
13 Thread bar
14 1/4" hose
Fig. 6: Tap
INSTALLATION OF THE TAP
