9
To install the waste water outlet, drill into the 8 mm diameter hole of the
clamp in the same tube (Fig. 7 b). Connect one end of the 3/8-inch tap to
this clamp and the other end to the 3/8-inch outlet.
Fig. 7: Waste water connection
Fig. 8: Water inlet valve
• Insert the plug of the pressure pump adapter into the 24 VDC power
supply input of the system. Then, connect the adapter to the power
supply.*
• Open the tap for the clean water.
• Close the clean water tank valve.
• By opening the
1/4" ball valve
, the tap water is supplied to the
system (Fig. 8). The pump starts working.
• When the water flows, close the tap.
• As soon as pump operation has stopped, check each individual
connection for possible leaks and open the clean water tank valve.
• Since the tank is being filled for the first time, drain the clean water
at least once.
* Available for the model with pressure pump
CHECKS BEFORE THE START -UP
CONNECTION OF THE WASTE WATER
OUTLET
