Note:
Please allow at least 5 minutes for the proper
temperature setting to be reached.
Note:
At any time during treatment, you can pause and
turn the device off by touching the power button.
• Breathe slowly and deeply in through your nose.
• The device will automatically shut off after 25 minutes
of use or if there is overheating of the heating element
for safety.
Note:
Residue may remain inside the mouthpiece or
inside the device due to vapor accumulation. Remove the
rubber cover after each use to release any residual fluid.
Disinfect and clean the device at the end of each day.
To prolong mesh technology component, allow at least 1
hour interval between each treatment.
CLEANING
Note:
The Avya Steam Inhaler device and accessories are
intended for multiple use. Before you clean the device,
always switch it off, unplug it and let it cool off. The Avya
main device and the accessories used must be cleaned
after each use.
Cleaning the water tank and vibrating mesh element with
the self clean feature:
• Open the cover of the water tank and discard the
remaining aqueous solution.
• Remove the water tank and rinse thoroughly.
• Insert the water tank in reverse direction (Fig. 8).
• With a liquid dropper, drop 5-6 droplets of water onto
the mesh element (Fig. 9).
• Power on the device. Avya will suction the water in
reverse mode into the water tank and clear out any
residue.
• Power Off the device and wipe the water tank dry.