5
Programming example
Select a product family
Select ‘Select Product’
Select a product
Select the programming subset
Scroll up or down to select the parameter to change
Change the value as required.
Press ‘Send’ to send parameter value to device.
If more than one parameter has been changed. Press ‘Send’ for 2 seconds and all the parameters in the current
menu will be sent, including those that have not been modified
STANDALONE
Select Product
>
SELECT PRODUCT
PRM
>
DD
>
AD
>
DD
Detector Params
>
Output Ch. 1
>
Output Ch. 2
>
DETECTOR PARAMS
Walk Test LED
Off
Time Out (mins)
20
Manual Time Out
10
DETECTOR PARAMS
Walk Test LED
Off
Time Out (mins)
15
Manual Time Out
10
All parameters specified in the individual Product Guides can be programmed using this handset. Refer to the product
guides for information on the default values and details on the parameters. The ‘Help’ function on this handset gives an
overview of the parameter function.
PRODUCT FAMILY
Standalone
>
An- 10
>
D- Mate
>
Programming a battery-powered An-10 device
Battery-powered An-10 devices must be set into a receive mode before they can be programmed.
This is achieved by pressing the Config Button on the device. The device’s LED indicator will then blink red to
show it is in receive mode.
The device will return to sleep mode if it does not receive any commands within 30 seconds.
Permanently powered devices are always ready to receive the infrared signals provided by the handset.
Note
Please refer to the target device’s instruction leaflet for the location of its Config Button.
