auna PIPA, Руководство пользователя

Страница: 22 / 26

1
- After correctly installing the base on the vehicle
seat, press the stability leg adjust button to
extend the stability leg to the floor.
2
- Stability leg should make firm contact with the
vehicle floor.
3
- Indicators should show green.
When the stability leg indicator shows red this
means the stability leg is in the wrong position.
Make sure the stability leg is secure and makes
firm contact with the vehicle floor. The stability
leg indicator shows green when it is properly
contacting the floor of the vehicle.
The stability leg has 12 positions.
This seat is safe to use with stability leg in
use or stored for both rigid LATCH or vehicle
belt installation.
Child Restraint Only Install
This child restraint can be installed without a base
in 3 different ways.
4
- Place vehicle in park and on level ground.
Position child restraint so that child is facing
the rear of the vehicle.
Only install in a forward facing vehicle seat.
1
2
3
4
40
PIPA instructions
41
PIPA instructions