auna Harmonica, Инструкция по эксплуатации

Страница: 14 / 28

14
EN
OPERATION
Power supply
Operating the unit on AC power Insert one end at the supplied power cord
to the DC 9V IN Jack located at the rear of the unit and the other end into
the Wall outlet. When the First time used the cord has to be firmly pushed
into the socket if does not work on AC, to try again to be sure for a positive
connection.
Power on
Press the Standby button to turn the unit.
DAB MODE
Press the DAB/FM/AUX button to select DAB radio mode
Auto select :
Press the SCAN button, “AUTOTUNE FULL SCAN” will show
on the display, and the number of DAB station will shown on the upper
right corner, and it will automatically play the first station. Tune the TUNE/
SELECT knob to choose the next or previous station.
Manual select:
Press and hold the TUNE/SELECT knob until the “MANUAL
TUNE” icon shown on the display, then tune the TUNE/SELECT knob to
choose the station.
Note : you many have to wait for the unit to tune in to the new channel.
DAB radio stations presetting
• To receive the desired DAB station, press and hold the PRESET button,
“Empty P1” (P1 is the current program number) will appear on the
display, the current program number „P1“ is flashing on the display.
• Tune the TUNE/SELECT knob to choose your desired program number
(1-20) you want stored to. Then press TUNE/SELECT knob to store it.
• Repeat the same procedures until all the desired radio stations were
stored into the program list.
• Recall the memory, press PRESET button and tune the TUNE/SELECT
knob to select the stored radio station as desired. Press the TUNE/
SELECT knob to confirm.