4
Assembly Instruction
KS 4 S12 24V DC R
By attaching the drive to a movable
element of the window a so-called
“power-operated window” is created
which, according to the Machinery
Directive 2006 / 42 / EG, represents a
machine.
Attention must be paid to possible
hazards when used with tilting or
rotating windows, whose secondary
closing edges are located at less than
2,5 m installation height above the fl oor,
under consideration of the Control Unit
and usage!
N
OTE
!
W
ARNING
P
RELIMINARY
REMARK
01
I
NTENDED
USE
Area of application / Scope of application
This drive is intended for the electromotive opening and
closing of windows in facade and roof areas.
The prime task of this product
, in combination with
a window and a suitable external control unit,
is to
evacuate hot smoke and combustion gases in case
of fi re
, to safe human lives and protect material
assets. Furthermore, combined with a suitable external
control unit, the electromotive operated window ensures
fresh air supply for the natural ventilation
of the
building.
Intended use according to the Declaration of Con-
formity
The drive is intended for stationary installation and
electrical connection at the window as part of a building.
In accordance with the attached Declaration of Confor-
mity the drive, in combination with an external Control
Unit from A
UMÜLLER
, is released for its intended use at a
power-operated window
without an additional on-site
risk assessment
for the following use:
• Application for natural ventilation
with an installation height of the drive of at least
2,5 m above the fl oor, or
with an opening width at the HSK of the operated
element of < 200 mm by a simultaneous speed of
< 15 mm/s at the HSK in closing direction.
•
Application as NSHEV (natural smoke and heat
exhaust ventilators) for ventilation without dual
function for ventilation in accordance with
EN12101-2.
The need for a risk assessment at the installation site
due to the reasonably foreseeable misuse.
A risk assessment in accordance with the Machinery
Directive 2006 / 42 / EG
for the usage of the power-
operated window
for natural ventilation is absolutely
necessary
under the following conditions:
• the installation height of the drive is < 2,5 m above the
fl
oor
and
• the opening width at the HSK > 200 mm,
or
• the closing speed at the HSK is > 15 mm/s,
or
• the opening speed at the HSK is > 50 mm/s,
or
• the closing force at the HSK is > 150 N
The following fl ow chart can be applied, which also includes
the protective measures in accordance with EN 60335-2-
103/2016-05.
We as manufacturers are well aware of our duties and
responsibilities regarding the development, manufactu-
ring and placing of safe window drives on the market and
consistently implement them. Ultimately, however, we have
no direct infl uence on the usage of our drives. Therefore,
as a precaution, we point out the following:
• The
constructor or his agent
(architect, specialist
planner)
are obligated
by law
to evaluate the
hazards to persons
, originating from the usage,
installation position, opening parameters as well as
the planned type of installation of the power
operated window and the external Control Unit,
already
in the planning phase and to establish
necessary protective measures
.
• The
constructor / manufacturer
of the machine
“power-operated window”
must implement
the
planned
protective measures
at the installation site
or, if not yet established,
determine them
by theire
own responsibility and detect or
minimize possible
remaining
risks
.