6
remaining time. You will get fresh bread at 7:00 in the morning, if you don’t want to take out
the bread immediately, the keeping warm time of 1hour starts.
Note:
1.This button is not applicable for the programs Ultra fast, Jam and Bake.
2. For time delayed baking, do not use any easily perishable ingredients such as eggs, fresh milk,
fruits, onions, etc.
KEEP WARM
Bread can be automatically kept warm for 60 minutes after baking. If you would like to take the
bread out, switch the program off with the START/STOP button.
HOW TO USE FRUIT NUT DISPENSER
There is a small black button on the top of the bread maker to help you remove the nut
dispenser.
Bread maker adopted automatic procedure,you can add ingredients to the nut dispenser
before making bread,just open the transparent lid to add.After adding,set the program of
making bread,the ingredients of the nut dispenser will automatically fall into the bread machine
and mix with the dough.
PS:Nut dispenser should drop automatically after 45 minutes on basic bread setting.
MEMORY
If the power supply has been broken off during the course of bread making, the process of
bread making will be continued automatically within 10 minutes, even without pressing
Start/Stop button. If the break time exceeds 10 minutes the memory cannot be kept and the
bread maker must be restarted,but if the dough is no further than the kneading phase when
the power supply breaks off, you can press the “START/STOP” straight to continue the program
from the beginning.
ENVIRONMENT
The machine may work well in a wide range of temperatures,but there could be a difference in
loaf size between a very warm room and a very cold room.We suggest the room temperature
should be between 15℃ and 34℃.
WARNING DISPLAY
:
1. If the display shows “HHH” after the program has been started, the temperature inside is still
too high (accompanied by 5 beep sounds). Then the program has to be stopped.Open the lid
and let the machine cool down for 10 to 20 minutes.
2.
If the display shows “LL” after pressing the START/STOP button ( except the programs BAKE),
it means the temperature inside is too low (accompanied by 5 beep sounds, stop sound by
pressing the START/STOP button, open the lid and let the machine rest for 10 to 20 minutes
to return to room temperature.
3. If the display shows “EE0” after you have pressed START/STOP, the temperature sensor is
disconnected please check the sensor carefully by Authorized expert.