manualshive.com logo in svg

AUMA SA 07.2, Руководство по эксплуатации, Страница: 26 / 64

Поделиться
Скачать
AUMA SA 07.2 Скачать руководство пользователя страница 26

5.2.3.

Terminal compartment : close

Figure 21: Close terminal compartment

[1]

Cover (figure shows S version)

[2]

Screws for cover

[3]

O-ring

[4]

Screws for socket carrier

[5]

Socket carrier

[6]

Blanking plug

[7]

Cable gland (not included in scope delivery)

Short-circuit due to pinching of cables!

Risk of electric shock and functional failures.

→

Carefully fit socket carrier to avoid pinching the cables.

1.

Insert the socket carrier [5] into the cover [1] and fasten with screws [4].

2.

Clean sealing faces of cover [1] and housing.

3.

Check whether O-ring [3] is in good condition, replace if damaged.

4.

Apply a thin film of non-acidic grease (e.g. petroleum jelly) to the O-ring and
insert it correctly.

5.

Fit cover [1] and fasten screws [2] evenly crosswise.

6.

Fasten cable glands and blanking plugs applying the specified torque to ensure
the required enclosure protection.

26

 SA 07.2 – SA 16.2 / SAR 07.2 – SAR 16.2

Electrical connection

 SEM 01.1/SEM 02.1

Содержание SA 07.2

































































Отзывы:

Нет отзывов