Aulisa Guardian Angel Rx GA2000, Инструкция по эксплуатации

Страница: 43 / 79

High Priority Alarm
SpO
2
Upper Alarm Limit
SpO
2
Lower Alarm Limit
Pulse Rate Upper Alarm Limit
Pulse Rate Lower Alarm Limit
Factory
Default
Adjustment
Interval
Off
85%
150 bpm
50 bpm
Off, 85 to 100
Off, 50 to 95
Off, 75 to 275
Off, 30 to 110
Adjustment
Options
1% SpO
2
1% SpO
2
1 bpm
1 bpm
The new ALARM LIMITS do not go into effect until the “CONFIRM”
button is tapped.
A potential hazard exists if different alarm presets are used for the
same or similar equipment in any area.
4. Tap on ʻʻ + ʼʼ or ʻʻ– ʼʼ buttons or drag the ʻʻseekbarʼʼ to adjust the values.
NOTE: The minimum alarm limit cannot exceed the max alarm limit,
even if the max alarm limit is turned off. For example, if the
max SpO
2
limit is turned off but was previously set at 90%,
the min SpO
2
limit cannot be set higher than 90%. If you
want to set min SpO
2
limit at 90%, turn on the max SpO
2
limit,
set it above 90% and turn it off again as you wish.
NOTE: The following table describes the default settings, adjustment
ranges, and intervals.
5. Tap on ʻʻCONFIRMʼʼ to save the alarm limits.
NOTE: The SpO
2
and pulse rate upper and lower alarm limits
appear as smaller values to the top right and bottom right of
their respective window on the MAIN screen.
40