34
*For EQUIPMENT and SYSTEMS that are not LIFE-SUPPORTING
Guidance and Manufacturer's Declaration - Electromagnetic Immunity
This device is intended for use in the electromagnetic environment specified below. The customer
and/or user of this device should ensure that it is used in such an environment.
Immunity test
IEC 60601-1-2
test level
Compliance level
Electromagnetic environment
-guidance
Conducted RF
IEC 61000-4-6
3 V
150 kHz to 80 MHz
6 V
ISM and amateur
radio bands
3 V
150 kHz to 80 MHz
6 V
ISM and amateur
radio bands
Portable and mobile RF
communications equipment
should be used no closer to
any part of the device,
including cables, than the
recommended separation
distance calculated from the
equation applicable to the
frequency of the transmitter.
Field strengths from fixed RF
transmitters, as determined by
an electromagnetic site
survey,
a
should be less than
the compliance level in each
frequency range.
b
Interference may occur in the
vicinity of equipment marked
with the following symbol:
Radiated RF
IEC 61000-4-3
10 V
80MHz to 2.7 GHz
10 V
80MHz to 2.7 GHz
NOTE 1
At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2
These guidelines may not apply in all situations. Electromagnetic propagation is affected
by absorption and reflection from structures, objects, and people.
a.
Field strengths from fixed transmitters, such as base stations for radio
(cellular/cordless) telephones and land mobile radios, amateur radio, AM and FM
radio broadcast and TV broadcast cannot be predicted theoretically with accuracy.
To assess the electromagnetic environment due to fixed RF transmitters, an
electromagnetic site survey should be considered. If the measured field strength
in the location in which the device is used exceeds the applicable RF compliance
level above, the device should be observed to verify normal operation. If
Содержание Guardian Angel GA1000 Series
Страница 4: ...3 Guide to Symbols Single Use...
Страница 5: ...4 Date of Manufacture...
Страница 16: ...15 the button to clear the alarm of bluetooth disconnected or power off...