Aulisa GA-AP0011, Инструкция по эксплуатации

Страница: 10 / 32

9
Device Setting Up
Before you begin your monitoring session, unpack the Thermometer Module and
become familiar with its parts.
Step 1: Make sure the connector of the Thermometer
Box aligns with the connector on the holder.
Step 2: Secure the Thermometer Box onto the holder of
the Sensor Patch.
Step 3: Peel the releasing paper off the Sensor Patch.
Step 4: Attach the sensor probe to the center of the
armpit, with the Thermometer Box placed on
the chest.
NOTE: The Power LED will blink green when the power is ON.