AUGIER Energy DIAM4000, Установка и обслуживание

Страница: 37 / 68

©2004 AUGIER SA.
II-37
II.2.1.4.3 IEC Multiwire remote control (IEC type CCRs only):
The 34-pin terminal blocks making up the inputs and outputs for remote control are situated at the back of
the CCR.
Terminal block T1:
Pin Function Pin Type
1 B0 control Input voltage or Contact with respect to C
2 B1 control Input voltage or Contact with respect to C
3 B2 control Input voltage or Contact with respect to C
4 B3 control Input voltage or Contact with respect to C
5 B4 control Input voltage or Contact with respect to C
6 B5 control Input voltage or Contact with respect to C
7 B6 control Input voltage or Contact with respect to C
8 B7 control Input voltage or Contact with respect to C
9 “ON” control Input voltage or Contact with respect to C
10 Aux1 control Input voltage or Contact with respect to C
11 Aux2 control Input voltage or Contact with respect to C
12 Aux3 control Input voltage or Contact with respect to C
13 Aux4 control Input voltage or Contact with respect to C
14 C Common to Pin1 to Pin 13** inputs
15 +V Common to Pin16 to Pin20 inputs
16 Inhibit control Contact input with respect to +V
17 Aux 5 control Contact input with respect to +V
18 Aux 6 control Contact input with respect to +V
19 Aux 7 control Contact input with respect to +V
20 Aux 8 control Contact input with respect to +V
21
22 B0 return Static contact output
23
24 B1 return Static contact output
25
26 B2 return Static contact output
27
28 B3 return Static contact output
29
30 B4 return Static contact output
31
32 B5 return Static contact output
33
34 B6 return Static contact output
**See paragraph II.3.2 for configuring the remote control type.
L
The remote control protection fuse is marked as F5 on the motherboard (T315mA 5x20mm)
T1 T2