manualshive.com logo in svg

Auger Torque SWEEPER BROOM, Быстрый старт, Страница: 1 / 4

Поделиться
Скачать
Auger Torque SWEEPER BROOM Скачать руководство пользователя страница 1

EUROPE:  +44 (0) 1451 861 562            AUSTRALIA: +61 (0) 7 3274 2077            USA: (+1) 844 287 6300

1

1

SWEEPER BROOM

QUICK START GUIDE

This Auger Torque quick start guide will enable you to get your new product up and running 

in no time.  The complete operators manual is available on the Auger Torque website.

To download a copy in pdf format, simply scan the QR code or visit www.augertorque.com.

1

1

ENGLISH

For warranty purposes this product MUST be registered with Auger Torque within

14 days of purchase by the end user.

FITTING THE SWEEPER UNIT

Refer to the parent machine operators manual for attaching accessories.

Fit Sweeper to parent machine arms and lock in place.

Locate the flow and return hydraulic pipes on the Sweeper Unit.

Connect hydraulic pipes to parent machine

Connect quick release couplers (if fitted).

2) Slot the top of the parent machine frame under the top edge of the Mounting Frame or Locating

Hooks (refer to parent machine operator’s manual).

3) Swing the parent machine frame to the vertical position.

Following the parent machine operator’s manual, ensure that the Mounting Frame is securely

locked in place.

99-95515004 - ISSUE 1-0

Содержание SWEEPER BROOM

Страница 1: ...4 days of purchase by the end user FITTING THE SWEEPER UNIT Refer to the parent machine operators manual for attaching accessories Fit Sweeper to parent machine arms and lock in place Locate the flow and return hydraulic pipes on the Sweeper Unit Connect hydraulic pipes to parent machine Connect quick release couplers if fitted 2 Slot the top of the parent machine frame under the top edge of the M...

Страница 2: ...ulic quick release couplers which are required for connection to the parent machine The parent machine auxiliary hydraulic connections are normally located near the end of the loader arms The motor and bearing assemblies on the Sweeper unit can be changed over from right to left so that the motor hoses are postioned near the auxiliary hydraulic connections on the parent machine see operators manua...

Страница 3: ...parts Connect the cable plug to the control box plug Connect the control box to the parent machines auxiliary power supply The water pump is switched on an off with the toggle switch on the control box WARNING Do not run the pump without adequate water Water Tank Fill water tank with clean fresh water do not use dirty water salt water or chemicals Dirty water can block the system and spray nozzels...

Страница 4: ...el use just enough brush speed to roll the gravel not throw it Heavy Debris A slow travel speed is required Sweep a path less than the full width of the sweeper Increased engine speed may be required if debris becomes very heavy During Use Always carry the sweeper low to the ground to ensure good operator visibility Avoid excessive downward pressure on the brush and jockey wheels to prevent excess...

Отзывы:

Нет отзывов