Auerswald Box, Инструкция по установке и эксплуатации

Страница: 11 / 12

11
Reset to Default Factory Settings
In the default factory setting the Auerswald Box is configured as follows: Destination number (empty),
call acception (immediate), maximum call duration (60 minutes):
LED Signalization
The LED on the top side of the Auerswald Box shows the different operation modes.
LED switched off:
The Auerswald Box is in the state of inactivity.
LED blinks: The Auerswald Box is in the programming mode.
LED flashes: The Auerswald Box calls an internal subscriber
(only for operation mode B for incoming calls).
LED glows: The Auerswald Box has established a connection (e.g. between ATA and PBX)
Technical Data
Connections analog port of a PBX and output of an ATA
Power Supply from of the analog port of the PBX (jack „PBX/Tk-Anlage“)
Operating Voltage 20 V
Loop Current 20 mA min.
Case Polycarbonate, blue, semitransparent, 2 pieces
Dimensions
얒
95 x 33 mm
Weight app. 90 g
Safety CE
Temperature 0 to 40°C
of environment
Layout of Western modular jacks
Scope of Delivery
앫
1 device Auerswald Box
앫
2 connection cables RJ-11 on RJ-11
앫
User manual
앫
Guarantee flyer
앫
Mounting Material (2 screws and 2 dowels)
Wall Mounting
The device is also made for wall mounting.
Drill two wholes with a diameter of 6 mm and a distance of 70 mm. Put the enclosed dowels into the
wholes. Twist the screws until the heads of the screws have a distance of app. 3 mm to the wall. Then
push the device onto the screws and you pull it on the wall downwards until it stops.
N
9#
press the programming
key on the Auerswald Box
for at least 3 seconds until
the LED nearby flashes
pick up the
receiver of any
available inter-
nal telephone
dial the telephone num-
ber of the internal exten-
sion of the Auerswald
Box (e.g. 34)
wait for the
end of the
confirma-
tion tone
dial „9#“ to
reset to
default fac-
tory settings
confirma-
tion tone
hang up