TROUBLESHOOTING - Transmitters:
One or both of my transmitters doesn't work any more ( stopped working ).
Does the Red L.E.D. on the transmitter flash rapidly and flash
brightly when any of the transmitter buttons are pressed ?
SYMPTOM
YES
NO
Replace the transmitter battery, then test the
transmitter. Does the system operate now ?
YES
Diagnosis
Completed.
Does the transmitter
L.E.D. flash now ?
YES
NO
Defective transmitter.
Replace transmitter.
Start again from the
beginning.
NO
YES
*Program transmitter
to the system.
*If a programming
attempt failed, you
will need to erase
existing transmitter
codes first. ( page 8 ).
QUESTION
Does the system now operate properly ?
NO
Were the transmitters in question ever
programmed to operate the system ?
*Press and release
the LOCK button on
the transmitter two
times within 1 second.
*Try pressing the
LOCK button 10 times
within five seconds.
YES
Diagnosis
Completed.
NO
Defective transmitter.
Replace transmitter.
HELPFUL HINT :
If a transmitter has been programmed to the system at one time, it will remain
programmed. Disconnecting the vehicle's battery or removing the transmitter battery will not erase
transmitter codes from the SE system's memory. The only way transmitter codes are removed
from the system memory is by deliberately programming different transmitters, deliberately bumping
the codes out of memory, or deliberately erasing the system's memory !
DO NOT reprogram transmitters that you know are already programmed to the system. Instead, first
check to see if the transmitter needs to be realigned to the system.
BEGIN TROUBLESHOOTING
Page 10
