4. Within 10 seconds turn the ignition switch off, on, off, on, off, on.
(The siren or horn will beep and the lights will flash one time.)
5. Within 10 seconds, begin to press and release the push button switch to set the
tenths digit.
(As per the example, press and release 5 times to set the tenths digit to 5)
6. Within 10 seconds of the last press of the push-button, turn the ignition switch off
then on.
7. Within 10 seconds, begin to press and release the push button switch to set the
units digit.
(As per the example, press and release 2 times to set the units digit to 2).
8. Turn the ignition switch to the off position. Immediately observe the L.E.D. flash
pattern.
You will note the L.E.D. flashing five times, pause, and then flash two times, pause.
This pattern will be repeated three times indicating the new code (52) has been
accepted and stored in memory.
NOTE: If after step 7, the L.E.D. flashes a code other than what was just entered, this
indicates that the code has not been changed. You will have to repeat steps
1 through 7 above being certain to note the following:
Acceptable digits 10ths or units are 1 through 9. The unit will not recognize a 0 (Zero),
or no digit entered in any place, units or tenths.
NOTE: If 15 seconds of inactivity expire, or if the ignition switch is turned off for more
then 5 seconds during any of the above steps, the unit will revert back to the
last successfully stored code.
ADDITIONAL REMOTE FUNCTION :
This system allows the control of any one of the following optional accessories;
Remote Car Starter
Remote Window Closure
Remote Window Open
To operate the optional accessory;
1. Press the lock, then unlock, then lock buttons on your keychain transmitter within
3 seconds.
2. The optional accessory will immediately activate.
OPTIONAL AUTO LOCK/UNLOCK FEATURE :
If your existing factory installed keyless entry system did not include the automatic door
lock and unlock feature, then this feature can be activated from the PRO 9232 upgrade
module. When this accessory has been added, any time the ignition key is turned to
the on position
and all vehicle doors are closed, the doors will lock in 4 seconds.
Additionally, any time the ignition key is turned to the off position, the doors will unlock.
Page 6
