-3-
5
TREBLE CONTROL
To adjust the treble level, first select the Treble mode by pressing
the Select button
3
so that the level number above the
TRE
indication is flashing. Within 5 seconds of choosing the Treble
mode, press the
+
or
–
side of the button of the Level control
2
to adjust the treble response as desired. The treble level will be
shown on the display panel from a minimum of
–7
to a maximum
of
7
(
0
is flat response). The display will automatically return to
the normal indication 5 seconds after the last adjustment or when
another function is activated.
6
LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first select the Balance
mode by pressing the Select button
3
so that the
BAL
indication
appears on the display panel. Within 5 seconds of choosing the
Balance mode, press the
+
side of the Level Control
2
to adjust
the stereo balance to the left channel speakers or the
–
side to
adjust it to the right channel speakers. When the volume level
between the right and left channels is equal,
0
L R
0
will be shown
on the display panel. Adjusting the balance toward the right will
increase the number on the right side of the display to a maximum
of
0
L R
9
(full right). Adjusting the balance toward the left will
increase the number on the left side of the display to a maximum
of
9
L R
0
(full left). The display will automatically return to the
normal indication 5 seconds after the last balance adjustment or
when another function is activated.
7
FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first select the Fader
mode by pressing the Select button
3
so that the
FAD
indication
appears on the display panel. Within 5 seconds of choosing the
Fader mode, press the
+
or the
–
side of the Level Control
2
to
adjust the front-rear speaker levels as desired. When the level
of the front and rear speakers is equal,
0
F R
0
will be shown on the
display panel. Adjusting the fader toward the front speakers
will increase the number on the left side of the display to a
maximum of
9
F R
0
(full front). Adjusting the fader toward the
rear speakers will increase the number on the right side of the
display to a maximum of
0
F R
9
(full rear). The display will
automatically return to the normal indication 5 seconds after
the last fader adjustment or when another function is activated.
8
LOUDNESS CONTOUR (LD)
Pressing this button for longer than 2 seconds will activate the
Loudness Contour as indicated by
LOUD
on the display panel.
When listening to music at low volume levels, this feature will boost
the bass and treble ranges to compensate for the characteristics
of human hearing. Pressing the button again for longer than
2 seconds will deactivate the feature and
LOUD
will disappear
from the display panel.
NOTE:
Momentary presses of the button will change the radio
sensitivity in Seek and Scan Tuning modes from local to
distance and back again as described in section
bn
.
9
AM/FM BAND SELECTOR (BND)
AUTO-STORE TUNING (AS)
During radio operation, each momentary press of this button will
change the radio band. The indication
AM
,
FMI
, or
FMII
will
appear on the display panel according to your selection.
Pressing and holding the button for longer than 4 seconds will
activate the Auto-Store Tuning function which will automatically
scan the AM or FMII bands and enter strong stations into the
pre-set memory positions for that band. If you have already set
the pre-set memories on the AM or FMII bands to your favorite
stations, activating the Auto-Store feature will erase those stations
