OPERATING INSTRUCTIONS
-1-
1
ON-OFF POWER BUTTON
VOLUME LEVEL MEMORY
Press this button momentarily to turn the unit on or off. The unit
will also turn on automatically when a compact disc is inserted if
the ignition switch is "on".
This button is also used to set the memory for the volume level
which will be recalled when the unit is turned on. To set the
volume memory, turn the unit on and adjust the volume using
the Volume Control
2
to the level which you wish to be recalled
when the unit is turned on. Then, press the On-Off button and
hold it for approximately 2 seconds. The unit will turn off and the
selected volume level is now set in the memory. If the unit is
turned off with the volume higher than the memory setting, the
unit will return to the memory setting when turned back on. If,
however, the unit is turned off with the volume lower than the
memory setting, the unit will return to the lower setting when turned
back on.
2
VOLUME LEVEL CONTROL
To increase the volume level, press the
+
side of the button. The
volume will increase and the level will be shown on the display
panel from a minimum of 0 to a maximum of 80. To increase the
volume quickly, keep the button pressed. To decrease the
volume level, press the
–
side of the button. Keep the button
pressed to decrease the volume quickly. The display will
automatically return to the normal indication 5 seconds after
the last volume adjustment or when another function is activated.
These buttons are also used in conjunction with the Select
button
3
to adjust the bass, treble, balance, and fader levels as
described in
4
,
5
,
6
and
7
.
3
2
1
8
9
20
21
22
10
12
13
14
15
16
19
18
23
24
25
11
17
