•
To reply to an inbound message, select the message and press the “Reply”
toolbar button. The phone number of the sender will be populated in the send
area below. Enter your new message and press the “Send” button to send
the message.
•
To forward an inbound message, select the message and press 'Forward'
toolbar button. The message will be populated in the send area below
prefixed with a “FW:”. Press the “Send” button to send the message.
•
To resend a sent message, select the message and press the “Resend”
toolbar button. The phone number and message will be populated in the send
area below. Press the “Send” button to send the message again.
Sending TXT Messages
•
To Send a TXT to an individual or multiple Verizon Wireless messaging
subscribers, simply enter a Verizon Wireless 10-digit mobile number or click
on the To button to open your Contact List. Separate each address with a
comma, (Ex: 4529067334, 6594556321).
•
To Send a TXT to one of the entries in your Contact List, click the “To” button
to open the Contacts window. Simply double click on the name of the user
and that individual will automatically be added to the “Send To” field. Holding
down the “Ctrl” key while you click names from the lists will allow you to select
multiple names at once.
•
The phone number and the message field are required.
•
The Character counter counts up from 0 to 160 and counts all of the
characters typed in the message field.
•
Click the “Send” button.
TXT Contacts
The Address Book allows you to store the names and mobile numbers of your
personal contacts.
To create a personal contact:
•
From the Contact List dialog, press the “Add” button.
•
Enter the full name of the contact into name into the “Name” field.
•
Enter either the 10-digit mobile number into the “Mobile 1” field.
•
The “Mobile 2” field can be used to enter a second mobile phone number. This is used if
the individual sends you a message from this number. You will see the user’s name next
to the inbound message instead of the phone number.
•
Click the “OK” button. The contact name will now display in the list.
To edit a personal contact:
•
Click a name from the list and press the “Edit” button.
•
Make the necessary changes and click the “OK” button.
•
Clicking the “Cancel” button will not save any changes you have made.
•
Clicking the “Delete” button will remove that name from your list.
* Some PC Cards do not support storing of Contacts.
21
PC5740 User’s Manual
