Dormancy:
NationalAccess and BroadbandAccess data sessions become dormant if you are not sending
or receiving any data. As soon as you resume sending or receiving data, the data session will
return to an active state.
Depending on your device and your NationalAccess or BroadbandAccess plan, your data
session may disconnect during a dormant state. See your Verizon Calling Plan brochure for
details or visit www.verizonwireless.com. If this happens, select disconnect, and then connect
again.
While dormant your wireless phone / device may be able to receive a voice call. If you leave
your wireless phone connected to your PC, after you finish your voice call you may be able to
resume your data session as you normally would.
3.4 Warning Message
NationalAccess
The first time you connect via the NationalAccess connection, the following warning
message will be displayed:
ATTENTION
You are about to establish a NationalAccess (1xRTT) connection. Charges apply
in accordance with your subscription to Verizon Wireless' NationalAccess.
To see our current pricing for NationalAccess, please visit
http://www.verizonwireless.com/b2c/mobileoptions
This message will display each time you go to connect via the NationalAccess
connection until you select “Do not show this warning again”.
NationalAccess - BroadbandAccess
The first time you connect via the NationalAccess - BroadbandAccess connection,
the following warning message will be displayed:
ATTENTION
You are about to establish a BroadbandAccess or NationalAccess connection.
Charges apply in accordance with your subscription to Verizon Wireless’
NationalAccess/BroadbandAccess.
To see our current pricing for BroadbandAccess, please visit
http://www.verizonwireless.com/b2c/mobileoptions
This message will display each time you go to connect via the NationalAccess -
BroadbandAccess connection, until you select “Do not show this warning again”.
17
PC5740 User’s Manual
