Introducing the Remote Control
Insert Batteries into
the Remote Control
Insert two size AA batteries by matching the and on the batteries to the
diagram inside the battery compartment.
1
2
Precaution on battery use
Improper use of batteries can result in a leakage of chemicals and/or explosion.
Be sure to follow the instructions below.
=
Place batteries with their terminals corresponding to the (+) and (–) indications.
=
Different types of batteries have different characteristics. Do not mix batteries
of different types.
=
Do not mix old and new batteries. Mixing old and new batteries can shorten the
life of new batteries and/or cause old batteries to leak chemicals.
=
Remove batteries as soon as they are non-operable. Chemicals that leak from
batteries can cause a rash. If chemical leakage is found, wipe with a cloth.
=
The batteries supplied with the product may have a shorter life expectancy due
to storage conditions.
=
If the remote control is not used for an extended period of time, remove the
batteries from the remote control.
Using the Remote
Control
Use the remote control by pointing it towards the remote sensor window of the
set. Objects between the remote control and sensor window may prevent proper
operation.
Cautions regarding use of remote control
=
Do not expose the remote control to shock. In addition, do
not expose the remote control to liquids, and do not place in
an area with high humidity.
=
Do not install or place the remote control under direct
sunlight. The heat may cause deformation of the unit.
=
The remote control may not work properly if the remote
sensor window of the main unit is under direct sunlight or
strong lighting. In such a case, change the angle of the
lighting or TV set, or operate the remote control closer to
the remote sensor window.
This above illustration is for reference only. The remote sensor may be in
different locations on different models.
19
