background image

9

PLACEMENT OF THE ADC700

For best operating results, the inverter should be placed on a flat surface,
such as a vehicle seat or floor. A power cord measuring 3 feet (1.0 meter)
has been provided for easy positioning of the inverter. ADC700 should only
be used in locations that meet the following criteria:

DRY:

Do not allow water or other liquids to come into contact with the
ADC700 inverter.

COOL: Ambient air temperature should be between -20° C and 40° C

(ideally between 15° C and 25° C (60 - 80° F). Do not place the
inverter on or near a heating vent or any piece of equipment
which is generating heat above room temperature. Keep the in
verter away from direct sunlight, if at all possible.

VENTILATED:

Keep the area surrounding the ADC700 clear to ensure

free air circulation around the unit. Do not place items on or over
the inverter during operation. A fan is helpful if the inverter is op
erating at maximum power outputs for extended periods of time.
The unit will shut down if the internal temperature exceeds 90° C.
Restart the unit once it cools down sufficiently.

SAFE: Do not use the ADC700 near flammable materials or in any

locations that may accumulate flammable fumes or gases.

Содержание 1286492

















Отзывы: