Audiovox 1286492, Руководство пользователя

Страница: 8 / 16

8
DO NOT CONNECT TO AC DISTRIBUTION WIRING
The
ADC700 is engineered to be connected directly to standard electrical
and electronic equipment in the manner described above. Do not connect
the Power Inverter to household or RV AC distribution wiring. Do not con-
nect the Power Inverter to any AC load circuit in which the neutral
conductor is connected to ground (earth) or to the negative of the DC (bat-
tery) source.
CAUTION: Rechargeable Appliances!
Certain rechargeable devices are designed to be recharged by plugging
them directly into an AC receptacle. These devices may damage the
ADC700. When first using a rechargeable device, monitor its temperature
for the initial 10 minutes of use to determine whether it emits excessive
heat. If excessive heat is detected, it is a good indication that the device
should not be used with this inverter. This problem does not occur with the
majority of battery-operated equipment. Most of these devices use a sepa-
rate charger or transformer that is plugged into an AC receptacle. The
ADC700 is easily capable of running most chargers and transformers.
FUSE REPLACEMENT
If the ADC700 is overloaded and the spade type fuse (s) (35A) is blown,
flip up the fuse (s) replacement cover on the back of the ADC700 and
replace the blown fuse (s) with a new spade type, 35 Amp fuse. Determine
the cause of the short before restarting your ADC700 again.