FUNCTION CONTROL
(Continued)
Remote Control
Using The Remote Control Correctly
1. Point the remote control at the remote sensor located on the unit.
2. When there is a strong ambient light source, the performance of the infrared remote sensor may be
degraded, causing unreliable operation.
3. The recommended effective distance for remote operation is about 4 meters (13 feet).
Battery Replacement
When battery becomes weak, the operating distance of the remote control is greatly reduced and you will need
to replace the battery.
Note:
If the remote control is not to be used for a long time, remove the battery to avoid damage caused by battery
leakage corrosion.
1.Open the battery door.
2. Insert one CR2025
(3V)
size battery.
Attention:
Take out the PVC sheet before operating
the remote control.
1.
POWER button
Turn the unit on from standby mode or turn the
unit into standby mode.
2.
BAND button
Switch the radio band between FM and AM.
3.
TUNING button
Search a radio station.
4.
MEMORY button
Memorize a radio station.
5.
SURROUND button
Change the output channels or the output
sound mode in AV IN mode.
6.
VOL +/- buttons
Increase or decrease the volume.
7.
FUNCTION button
Select the tuner mode and AV inputs. Every
time the button is pressed, the mode will
change cyclically as: AV1->AV2->AV3->Tuner
3
8.
NEXT button
Select the presetted stations or adjust the level
in Sound Adjustment.
9.
DISPLAY button
Show the current sound channel or status.
10.
TUNING button
Search a radio station.
11.
SOUND button
Select sound balance and tone control for
adjustment with the NEXT/PREV buttons.
12.
MONO/STEREO button
Press to select FM STEREO or FM MONO
mode.
13.
PREV button
Select to the presetted stations or adjust the
level in Sound Adjustment.
14.
TEST button
Test the volume of each speaker.
MONO
/
STERE
O
MEMORY
FUNCTION
DISPLAY
TEST
BAND
NEXT
PREV
POWER
1
8
9
10
11
12
13
14
7
2
3
4
5
6
