Rear Panel
FUNCTION CONTROL
1.
POWER button
Turn the power on or off.
2.
AV3 AUDIO IN (L&R) jacks
Connect to audio outputs.
3.
AV3 VIDEO IN jack
Connect to video outputs.
4.
AV1/2/3 buttons
Press AV1 or AV2 to enter auto-detected/auto-
switching mode, press again to switch to
“forced analog mode”. Press AV3 button to
select the AV3 input.
5.
TUNER / BAND button
Select the radio mode and press again to select
between FM and AM band.
6.
PRESET button
Select the memorized radio station.
7.
TUNING -/+ butons
Search a radio station.
8.
Display window
Show the status of the unit.
9.
Remote sensor
Accept the remote control signals.
10.
VOLUME knob
Adjust the volume.
11.
STANDBY indicator
When the unit is turned into standby mode by
the remote control, the light will illuminate.
12.
3 STEREO indicator
The light illuminates when 3 STEREO is
selected in AV IN mode.
13.
PRO LOGIC indicator
The light illuminates when Dolby Pro Logic is
active in AV IN mode.
14.
DIGITAL indicator
The light illuminates when Dolby Digital signal
is input in AV IN mode.
Front Panel
15. AV2 VIDEO IN Jack
16. AV2 AUDIO IN (L & R) Jacks
17. AV2 DIGITAL AUDIO IN Jack
18. AV1 DIGITAL AUDIO IN Jack
19. AV1 VIDEO IN Jack
20. AV1 AUDIO IN (L & R) Jacks
21. Right Front Speaker terminals
22. Center Speaker terminals
23. Left Front Speaker terminals
24. Power Cord
25. FM ANTENNA terminals
26. AM LOOP ANTENNA jack
27. TV VIDEO OUT jack
28. TV AUDIO OUT (L & R) jacks
29. Right Rear Speaker terminals
30. Subwoofer terminals
31. Left Rear Speaker terminals
2
1 2
3
4
5 6
7
8
9
10
11
12
13 14