RADIO OPERATION
Tuning Into A Station Manually
1. Press the TUNER/BAND button on the unit or the FUNCTION button on the remote control until the
frequency band appears on the display.
2. Press the TUNER/BAND button again or the BAND button on the remote control to select the desired
band.
3. Press the /- buttons to tune into a station.
FM Stereo
Press the MONO/STEREO button on the remote control until “STEREO” appears on the display. When the
radio signal is weak, the “ ((ST)) ” indicator will flash.
Weak FM Stations
Press the MONO/STEREO button until “MONO” appears on the display. Background noise will be reduced but
the signal reproduced will be mono. To restore stereo reception, press the MONO/STEREO button again.
To Search For A Station Automatically
•
Hold down the TUNING
buttons on the remote control or the front panel for 1 to 2 seconds, and a station
is searched automatically. After tuning in a station, the search stops.
•
The search may not stop at a station with a very weak signal.
•
When the search is in progress, press the TUNING buttons again to stop searching.
Presetting Stations
You can tune into a stored station directly by pressing the PRESET button.
20 stations on FM band can be preset.
20 stations on AM band can be preset.
1. Press the TUNER/BAND
button on the unit or the
FUNCTION button on the remote control until the
frequency band appears on the display.
2. Press the TUNER/BAND button on the unit again or the
BAND button on the remote control to select the
desired band.
3. Use the TUNING button to find your desired station.
4. Press the MEMORY button on the remote.
5. Press the NEXT
or PREV button to select the preset number and press the MEMORY
button on the
remote to store the station.
6. Repeat steps 2-5 to store other stations.
7. To change the presetted station. Repeat steps 2-5.
Tuning Into A Presetted Station
1. Press the TUNER/BAND button on the unit or the FUNCTION button on the remote control until the
frequency band appears on the display.
2. Press the TUNER/BAND button again or the BAND button on the remote control to select the desired
band.
3. Press the PRESET button on the unit repeatedly or the
NEXT or PREV button to select the presetted
station.
4. To check the presetted stations. Press the PRESET button repeatedly.
Notes:
•
Only the two front speakers and the subwoofer are active in tuner mode.
•
The SURROUND and TEST buttons on the remote control are unavailable in tuner mode.
9