20
Configuring the reference curve:
Choose the desired reference curve which you finally will achieve with the ad
-
justment of the DSP. The „ATF Reference“ is selected as default as this curve is
identical to today’s industry standard.
Alternatively you can choose a linear (flat) reference curve. This curve should
not be used for car audio measurements but for home applications only. It defi
-
nitely will not lead to satisfying results when applied for car audio purposes.
Besides that it is possible to define a reference curve by yourself if e.g. the “ATF
Reference” does not meet your personal taste. Each single frequency band of
the curve can be adapted separately. Subsequently you see one example where
the high frequency roll-off of the „ATF Reference“ has been eliminated:
You should save this self-defined reference curve via „Save File“ to your com-
puter’s hard drive so that you can easily recall it later on via the „Load File“
button.
After all settings in this menu have been done, you can switch back to the
analyzer display by clicking on the „BACK“ button or by hitting the “b” on your
computer’s keyboard.
