background image

Page 3

TT-2930 - High-torque Professinal turntable system

English

Instructions and recommendations

1 - Read the instructions :

It is advisable to read all instructions and operating instructions 
before using the device.

2 - Retain instructions :

It is advisable to keep the instructions for use and operation 
later.

3 - Consider the warnings :

It is advisable to carefully consider all warnings and 
instructions for operating the product.

4 - Follow the instructions :

It is recommended that you follow all operating instructions 
and use.

5 - Water and moisture :

Do not use near water, for example near a bathtub, sink or 
basin, or in a damp place or near a swimming pool, etc.. ..

6 - Installation :

Do not place this product on a rolling stand, 
tripod, bracket or table. The product may 
fall seriously injuring a child or an adult and 
seriously damaged. Use only a cart, stand, 
tripod, bracket or table recommended by 
the manufacturer or sold with the apparatus. 

In any case to install the equipment it is advisable to 
follow the manufacturer's instructions and use instruments 
recommended by it.
It is strongly advised to move with caution when rolling the 
cabinet the unit is over. Quick stops, excessive pushing and 
rough surfaces might topple the whole.

7 - Mount on a wall or ceiling :

It is recommended that you contact your dealer prior to 
installation.

8 - Vents :

Slots and openings in the cabinet are provided 
for ventilation, to ensure use of the product with 
confidence and to avoid overheating. These 
openings must not be blocked or covered.

We must be careful to never block the openings by placing the 
product on a bed, sofa, rug or other surface of this style. This 
device should not be placed in an enclosed facility such as a 
bag or rack unless aeration was provided or the manufacturer's 
instructions were followed.

9 - Heat :

It is advisable to keep the product away from heat sources 
such as radiators, stoves, heat reflector or other products 
(including amplifiers) that produce heat.

10 - Power supply :

This product works only on the voltage on a label 
on the back of the product. If you are unsure of the 
voltage of your electrical installation, consult your 
dealer or local power company.

11 - Protection of Electrical cables:

You must ensure that electrical cables are not likely 
to be walked on or pinched by items placed upon 
or against, paying particular attention to plugs and 
their exit point on the unit.

12 - Cleaning :

U n p l u g   t h e   u n i t   b e f o re   c l e a n i n g .   D o   n o t 
use attachments not recommended by the 
manufacturer. Use a damp cloth on the surface of 
the device. Do not pass the apparatus underwater.

13 - Period of no use :

Unplug the power cord of your appliance if you do not use it 
for a long period.

14 - Penetration by objects or liquids :

Do not enter into any kind of objects into this 
product through openings as they may cause fire 
or electric shock.
Never spill liquid of any kind on the product.

15 - Damage requiring service :

Ask qualified persons in the following cases:
- When the power cord or plug is damaged (e).
- If liquid has been spilled or objects have fallen 
into the apparatus.
- If the product has been in contact with rain or 
water.
- If the product does not operate normally by 
following the instructions.
- If the product took a shock.

16 - Maintenance / overhaul :

Do not attempt to review this product yourself.
This will expose you to dangerous voltage. Talk to 
qualified personnel.

17 - Operating environment :

Temperature and humidity environment Operating:
5-35 °, relative humidity below 85% (vent not 
blocked).
Do not install the unit in a poorly ventilated area or 
in a place subject to high humidity or direct sunlight 

(or strong artificial light)

Содержание TT-2930









Отзывы: