background image

English

TT-2930 - High-torque Professinal turntable system

Page  2

Risk of electrocution

To prevent electric shock,do not  use exten-
sion cord, power strip or other system without 
connecting metal parts in contact are com-
pletely out of reach.

1 - Safety Instructions

Important Safety Information

IMPORTANT symbol indicates an 

 

important recommendation for use.

The CAUTION symbol indicates a risk of product deg-
radation.

The WARNING symbol indicates a risk of harm to the physical integrity of the  
user and any other person present.
The product can also be damaged.

Used symbols

Only the relevant technical services and recognized  
by HITMUSIC are authorized to perform maintenance  
on this unit. Routine maintenance actions must follow 
the precautions in this manual

This device contains within its housing, uninsulated  
portions under tension high enough to pose a risk of 
electric shock. Do not under any circumstances per-
form maintenance on this unit when it is turned on.

This unit was created to operate in place heated and 
insulated from any form of moisture or water spray. 
Any use in wet locations, unprotected, or subjected to 
temperature changes represent a significant low risk  
to both the device for anyone nearby.  

CAUTION

 : To reduce the risk of electric shock, never remove  the covers. 

There are no user-serviceable parts inside. Contact a qualified service 
technician for maintenance of this unit.

Noise levels

The sound systems are capable of delivering  
a sound level (SPL) harmful to human health. 
The  sound  pressure  levels  are apparently 
noncritical damage hearing if the person is  ex-
posed over a long period.
Do not park close to the speakers in operation.

Environnemental Protection

• Your product is composed of materials to be recycled, do not throw in your trash, bring it to a collection center set up near 
your residence. The service centers you will resume your device at the end of life to proceed to its destruction in compliance 
with environmental rules.
• For more information http://www.hitmusic.fr/directives-deee.php.
• The environment is a cause that defends HITMUSIC, we sell only the products fit, conform to ROHS.

Содержание TT-2930









Отзывы: