Step 1
Connecting the transmitter
The transmitter has two stereo audio inputs, one zone-A and one zone-B input.
4 audio channels can be transmitted simultaneously. Both zone-A and zone-B audio
inputs can connect either to an unbalanced line-level audio output or a balanced
amplified speaker output. For best audio quality, we recommend using the
unbalanced line-level audio input.
The transmitter can transmit to Model 400 wireless audio receivers and Model 480
wireless amplifiers. Each audio channel is encoded with a channel ID and can be
selected by each wireless receiver.
Regardless of whether any specific audio channel is transmitted to a wireless
receiver or wireless amplifier, both the transmitter line-level and amplified speaker
audio inputs can be used to feed audio into the transmitter.
Connect the transmitter to an unbalanced audio input by using the supplied phone-
RCA audio cable. Connect the phone jack with the line level input of the transmitter
and the RCA jack with the RCA output of your audio source.
Alternatively, connect the transmitter to an amplified speaker output by using the
supplied speaker cables. Be sure to observe the correct polarity of the speaker
cable.
Note:
If one of the speaker cables is switched (reversed), one speaker will receive
an opposite polarity signal which will degrade sound performance.
It is possible to connect zone-A audio inputs to line-level audio outputs and zone-B
audio inputs to amplified speaker outputs and vice versa. However, only the
unbalanced line level input or speaker inputs of each zone can be used, i.e. you
cannot mix audio inputs within a zone.
Connect the supplied small AC adapter’s barrel-shaped plug into the DC 9V jack,
and then plug the transformer into a standard AC outlet. We recommend the use of
a surge protector to protect the transmitter from power surges.
Unpacking:
Check that this package contains:
One 5.8 GHz Digital Audio transmitter - Model 400, one 9 V AC adapter (wallwart),
four short speaker cables, two RCA audio cables.
ATTENTION!
Do not connect both the line level audio input and amplified speaker
audio input of the same zone. This may damage your audio source.
User and Installation Guide
R
User and Installation Guide
R
Limited warranty
WHAT YOUR WARRANTY COVERS
This warranty extends only to the original user of the equipment (“you”, ”your”)
and is limited to the purchase price of each part. Amphony and its affiliated
companies (”we”, ”our”, ”us”) warrant this Multi Channel Audio Transmitter
against defects in materials or workmanship as follows.
For a period of ninety (90) days from the original date of purchase, if
we determine that the equipment is defective subject to the limitations of this
warranty, we will replace it at no charge for labor. We warrant any such work
done against defects in materials or workmanship for the remaining portion of
the original warranty period.
For a period of one (1) year from the original date of purchase, we will
supply, at no charge, new or rebuilt replacement parts in exchange for parts we
determine are defective subject to the limitations of this warranty. We warrant
any such replacement parts against defects in materials or workmanship for
the remaining portion of the original warranty period.
”Parts” means items included in this package. It does
include other
parts purchased separately.
LABOR:
PARTS:
Note:
not
WHAT YOUR WARRANTY DOES NOT COVER
This warranty
consumer instruction, physical setup or
adjustment of any consumer electronic equipment, or signal transmission
problems.
This warranty
cosmetic damage, damage due to the affixing of
any attachment not provided with the product, loss of parts, connecting the
product to any but the specified receptacles, lightning, electrical surges, fire,
flood, or other acts of God, accident, misuse, abuse, repair or alteration by
other than authorized service personnel, negligence, commercial or institutional
use, or improper or neglected maintenance.
This warranty
equipment sold AS IS or WITH ALL FAULTS,
equipment removal or reinstallation, shipping damage if the equipment was not
packed and shipped in the manner we prescribe, nor equipment purchased,
serviced, or operated outside the contiguous United States of America.
does not cover
does not cover
does not cover
Page 3
Page 12
0
5
25
75
95
100
