30
4 CD PLAYER
▲
one step to the right. After the last position the cursor wraps around and
starts at the first position again.
Note
·
The name of the monitor loop is also user-definable (up to 12 charac-
ters in length).
To edit the name of the monitor loop you first have to activate the
loop (see section '
Set Monitor
' on page 23). Then edit the name of the
monitor loop as described above for editing the input channel name.
·
If the monitor loop is active, you are able only to edit the name of the
monitor loop, even if you use the keys
Ch+
and
Ch-
of the
Audionet System Remote Control to change the input channel. You
have to deactivate the monitor loop first, before you are able to edit
the input channel names again.
Tip
·
If you would like to edit the channel name for more than just the cur-
rently selected input channel, use keys
Ch+
and
Ch-
of the
Audionet System Remote Control to switch to the desired input
channel. The PRE1 G3 does not leave the setup menu, and you are
able to edit the channel name for other input channels very easily.
Press key
of the Audionet System Remote Control to advance the
cursor one position to the right.
number of currently
selected input channel
cursor
assigned channel name
Содержание PREI G3
Страница 1: ...1 Stereo Pre Amplifier User s Manual ...
Страница 2: ...2 ...
