Revision 1.02 Silver Night
- 6 -
Audion International
0
1
INPUTS
L
R
1
2
3
4
5
TAPE
GND
GND
RIGHT
LEFT
OUTPUTS
POWER
OFF
ON
H.T.
fuse
Ground
lift
Audion Silver Night Integrated / Remote Amplifier Rear Panel
0
1
INPUT
H.T.
fuse
1
4
2
3
OUTPUTS
Ground
lift
POWER
Off
On
Audion Silver Night Mono-block Amplifier Rear Panel
First connect audio input leads to the input RCA connectors. In the
case of the integrated / remote models , connect all audio input
leads. The top white sockets are for the Left input(s) the bottom
red sockets are for the Right channel(s).
Next, connect the loudspeaker cables to your Audion. For all
Stereo models the left and right channels are marked by red/black
colouring and also ground & channel name; ie left, right etc. Your
loudspeaker cables should be of a suitable quality and connect to
the corresponding red/black binding posts of the loudspeaker. To
achieve the best from your Audion we recommend that your
loudspeakers have an efficiency of 89 db or higher.
Unless ordered specifically all the above models come with an 8
ohm output. The Mono-block Amplifiers come with 2 x 8 ohm
outputs marked 2 x black & 2 x red. These are designed for “Bi-
amping”.
