background image

Revision 1.02 Silver Night 

- 7 -  

Audion International 

 

 

 

The ground lift switch is used to  effectively reduce a ground 
feedback loop and hence noise from some installations. 
Finally connect the power cord to a mains electricity supply.  
Before proceeding  – Are all the connections fitted correctly and 
securely tightened?  
 
Finally Check again – make sure everything is correct. 
 

Using your Audion 

 
Congratulations you are now ready to switch your Audion on.  But 
first we recommend turning the volume control on the front panel 
anti-clockwise to zero. On the rear panel locate the on/off button. 
Push the button downwards to position 1, this has now turned your 
Audion on. You will notice if everything has been installed correctly 
that your valves/tubes are starting to glow, your Audion is now 
“Warming up”. We recommend that an initial few minutes is 
allowed for the warm up process to take place. A valve/tube will 
change its audio characteristics slightly once it has reached its 
nominal operating temperature.  
 
Select your sound source, CD, record, etc. and play. Once your 
source has started playing adjust the volume control to your 
required level. 
 
On the Integrated model, the five switches correspond to the five 
inputs on the rear and can be switched in and out accordingly. 
 

MUTE

1

2

3

4

5

 

Audion Silver Night Integrated Amplifier Front Panel 

 

Содержание Golden Night 300B










Отзывы: