Audiomedia GDF879, Руководство пользователя

Страница: 9 / 29

Basic Operations
Turn on/off the power
1. Press button to turn on the unit.
The unit goes back to the last status after
power on.
2. W
hen on, press button more than 2
seconds to turn off the unit.
Mute
When on, press button briefly to cut the
sound.
Note:

Pressing button briefly again or
adjusting
volume will release muting.

MUTE appears on the TFT during muting.
Adjust the volume
Rotate the VOL knob to increase or decrease
the volume level.
The adjustable range of volume is 0 to 39.
Playing source selection
Method 1:
Press
SRC
button on the panel or remote
control to cycle through all the available
sources.
Method 2:
Open the 'SOURCE MENU' by touch SRC at
the top left corner of the TFT or press MODE
button on remote control, and then touch the
option you desired or select the option
by moving the cursor and then confirm.
Note:

When some devices are not ready, they
cannot be selected.

You should stop switching when the playing
source you desired has been selected and
wait for some seconds, the unit will auto
enter the playing source mode you have
selected.
When parking brake applied
1. If 'PRK SW' cable is connected to hand
brake switch, the video display of the TFT
monitor will be controlled by driving status,
system setup and input video sources.
2. When the car is moving ahead, if the
video disc is played, the screen appears
"WARNING!! Engage Parking Brake to
View Video", and blank screen. The above
warning screen will prevent the driver
watching images. The passengers at the
rear seats can watch normally.
When reverse driving
If the rear view video camera is connected,
the unit automatically switches to CAMERA
source during reverse driving. The unit returns
to the original work mode after the reverse
driving is done.
EN - 7