4.4 WIRING
Audiofocus power and signal cables with the appropriate section, length and connectors
for passive and active speaker are recommended
Connect power and signal cables as describe on the technical drawing. Make sure the
preset, volume are right. Check the signal output before application and lifting.
Passive version only have the speakon connector on the back. As it is a two voice
speaker, a 4P speakon connector is needed (1+/1- low; 2+/2-high). Powersoft Armonia
hold all ARES8 presets as in Powersoft X series or Canalli amplifier. One output can drive
up to heigh Serial version of ARES8p and two Parallels version of ARES8p. Use 2.5mm
2
speaker cable.
Page
sur
14
17
AUDIOFOCUS ARES8
USER’S MANUAL
