4.3.3 FLOOR POSITION
Either for a stand alone ARES8 (frontfill…)
application or for a complete stack (FOH),
ARES8 can be set in floor position with its
angle plate. The front grill is then 90° with
floor.
Also, easiest way to trigger the angle is compression method by using bottom ARES8 in
floor position.
-Let the stack down on
floor.
-Remove one angle pin at
one time on each side.
-Let the hoist go down and
simply let the weight move
the ARES8 down till the
right angle is reach.
Last step is to lift the ARES8 line source to the proper height as calculated by Easefocus.
The preset and level can be adjust easily while the cabinets are at human height. Each
cabinet sound and connection can also be check at this time.
Page
sur
13
17
AUDIOFOCUS ARES8
USER’S MANUAL
Hoist compression
