AudioControl SA-3052A, Руководство по эксплуатации

Страница: 46 / 64

SA-3052A Owner’s Manual
7-2
®
Chapter 7 - Contest Scoring
To change the mode:
1) Turn the SA-3052A off
2) Press and hold the PRINT switch
on the rear of the analyzer.
3) Turn the SA-3052A back on
4) Release the PRINT switch when
the appropriate mode is displayed. The
analyzer will stay in this mode until you
change it.
SA-3052
SA-3052
SA-3052 SA-3052
SA-3052
SA-3052
SA-3052A control settings
For proper operation in
the scoring mode, the controls
on the SA-3052A must be set
as shown in the figure at right.
If the dB per step switch is
not set on ‘3’, you will get the
error message of “3dB” on the
display.
Frequency response scoring
NOTE:
The unit must be in either
IASCA or USAC mode for
the scoring to work.
Few things are simpler than using the frequency response scoring in the SA-3052A
analyzer. There are just two steps:
1) Press the STORE/FREEZE button or recall a memory.
2) Press the PRINT button on the rear of the SA-3052A.
Presto, a completely scored printout (assuming you have a printer connected to the
SA-3052A). The SA-3052A will also display the response score.
You don’t have to wait until a competition to use the scoring feature of your ana-
lyzer. This thing is so simple to use, you should bring it out anytime there’s a customer in
90dB Range Center Zero 3dB/Step