23
Navigating the Set-Up Menus
Concert XR series
DOLBY VOLUME - Selects whether Dolby Volume is engaged for this input
with the options being “On” or “Off” (the default). Dolby Volume corrects
for volume inconsistencies and improves audio frequency response at lower
levels. This feature is not available when using the Multi-channel audio or
“Direct” modes. For more information go to www.dolby.com
DOLBY LEVELLER - The setting options are “0” (minimum) to “10”
(maximum) with the default being “2”. This Dolby Volume feature allows
matching of quiet and loud sources of source unit inputs regardless of
recording levels of content being played by a particular source unit.
DV CALIB OFFSET - Dolby Volume provides a Calibration Offset parameter
that compensates for speaker efficiencies and listening positions. If you set
the Speaker Levels on the Concert XR series properly using an SPL meter (like
the AudioControl DM-RTA) then you can leave this setting at 0.
STEREO MODE - If you are using an external subwoofer, and are listening
to stereo (two channel) sources, either digital or analog, you can select to
configure how the subwoofer receives it’s bass information. Note: The “Stereo
Mode” option is not available when using an analog source and you have
selected the “Stereo Direct” mode.
As Speaker Types - Your normal speaker configuration (as selected in the
“Spkr Types” menu) determines your subwoofer output.
Left/Right - Full frequency audio will be sent to your front left and right
speakers with no information going to the subwoofer.
Left/Right+Sub - Full frequency audio will be sent to your front left
and right speakers plus bass information is directed to your subwoofer
effectively duplicating the lower frequencies
Sat+Sub - This setting will drive the frequencies defined in your Speaker
Types crossover selections to the Sat for higher frequencies and Sub for
the lower frequencies.
SUB STEREO - If you have selected the “Left/Right+Sub” or “Sat+Sub”
setting in the “Stereo Mode” menu, then this setting adjusts the level of the
subwoofer when you are using a two-channel source.
IMAX MODE - Specifies if IMAX mode is enabled on the incoming audio
stream (AUTO) or if forced to ON or OFF.
AURO-MATIC 3D - Specifies the mode of the Auto-matic upconverter.
AUDIO SOURCE - Allows you to select how the Concert XR series receives
audio signals for this source. Settings options are “HDMI,” “Digital,” or “Analog.”
CD DIRECT - Use with PCM audio - this selection bypasses the compressed
audio detection.
