AudioControl Architect 560, Руководство пользователя

Страница: 25 / 32

ARCHITECT
Model 560
Model 735
Model 760
Installer’s Guide
™
21
Appendix A
Appendix A - Bridging The Architect
Caution - When bridging a zone, the minimum
speaker load impedance on that bridged output is
8 ohms. In a bridged system, each channel of the
bridged pair “sees” one half of the speaker load.
This means that a bridged amp driving a 8 ohm
speaker is operating into a 4 ohm load.
To increase the output power of The Architect, you can join
(bridge) the two channels of one zone into a single channel of 210
watts (100 watts, Model 735). Accomplishing this is a simple
matter. Just connect the audio input to both channels of that zone
using a ‘Y’ cord adapter and then connect the speaker terminals
as shown in the diagram below.
Bridge connection showing ‘Y’ cord
and Speaker Hookup