AudioControl Architect 560, Руководство пользователя

Страница: 22 / 32

®
Changing the PFM Modules
Removing the Cover
Changing The PFM Modules
Changing The PFM
Modules
WARNING: Unplug the Architect from AC power
before beginning. There are dangerous voltages
present inside.
The first task in changing the PFM modules is
to remove the top chassis of the Architect. To do
this, first remove the 18 screws marked in the figure
above. Now let your wrist relax for a few moments
and survey the innards of this beast. The PFM
modules are located on the circuit board that runs
along the rear of the Architect (see figure).
Use a small screwdriver to gently pry the exist-
ing modules from their sockets taking care not to
bend the contact pins. Now you can
install the replacement modules.
There is NO POLARITY to these
modules so they can install in either
direction.
Now you can put the top back
onto the Architect and go back to
enjoying your music.
18