AudioCodes Mediant 9000, Руководство по установке оборудования

Страница: 28 / 50

Mediant 9000 SBC
Hardware Installation Manual 28 Document #: LTRT-41659
4.3 Connecting Display and Keyboard
To perform initial configuration, display and keyboard are required.

Connect the display to the 15-pin HD D-Sub (HD-15) VGA port on the Mediant 9000.

Connect the keyboard to the USB port.
4.4 Connecting the Device to the IP Network
This section shows how to connect the device to the IP network.
The device's management interface uses special string names to represent the Ethernet
ports, as shown in the figure below:
Figure 4-10: Management String Name per Physical Ethernet Port

To connect the device to the IP network:

Use an Ethernet cable to connect an RJ-45 network port on the server's rear panel to
the LAN.
Figure 4-11: Connecting the Device to the IP Network
Notes:
1. Port GE_1 is used for OAM&P.
2. The HP iLO port is not used for management of the SBC application; it's used only
for hardware management. See http://www8.hp.com/us/en/products/servers/ilo/ for
more information.