manualshive.com logo in svg

AudioCodes 320HD, Руководство администратора

Поделиться
Скачать
AudioCodes 320HD Скачать руководство пользователя страница 84

 

320HD IP Phone 

Administrator's Manual 

84 

Document #: LTRT-08108 

Parameter 

Description 

voip/signalling/sip/regist
rar_ka/timeout 

Defines the registration keep-alive time interval (in seconds) between Keep-
Alive messages.  

The valid range is 40 to 65536. The default value is 60. 

voip/signalling/sip/proxy
_timeout 

The SIP proxy server registration timeout (in seconds). 
The valid range is 0 to 86400. The default value is 3600. 

voip/signalling/sip/regist
ration_failed_timeout 

If registration fails, this parameter determines the interval between the register 
messages periodically sent until successful registration. 

The valid range is 1 to 86400. The default value is 60. 

voip/signalling/sip/sip_r
egistrar/enabled 

Determines whether the phone registers to a separate SIP Registrar server. 

ƒ

 

[0]

 Disable (default) 

ƒ

 

[1]

 Enable 

voip/signalling/sip/use_p
roxy_ip_port_for_registr
ar 

 

Determines whether to use the SIP proxy’s IP address and port for 
registration. When enabled, there is no need to configure the address of the 
registrar separately. 

ƒ

 

[0] 

Disable (default)  

ƒ

 

[1] 

Enable 

voip/signalling/sip/sip_r
egistrar/addr 

The IP address or host name of the Registrar server. 

The default value is 0.0.0.0. 

voip/signalling/sip/sip_r
egistrar/port 

The UDP or TCP port of the Registrar server. 
The valid range is 1024 to 65535. The default value is 5060. 

voip/signalling/sip/sip_o
utbound_proxy/enabled 

Determines whether an outbound SIP proxy server is used (all SIP messages 
are sent to this server as the first hop).  

ƒ

 

[0] 

Disable (default)  

ƒ

 

[1] 

Enable 

voip/signalling/sip/sip_o
utbound_proxy/addr 

The IP address of the outbound proxy. If this parameter is set, all outgoing 
messages (including Registration messages) are sent to this Proxy according 
to the Stack behavior. 

The default value is 0.0.0.0. 

voip/signalling/sip/sip_o
utbound_proxy/port 

The port on which the outbound proxy listens. 
The valid range is 1024 to 65535. The default value is 5060. 

voip/signalling/sip/redun
dant_proxy/enabled 

Enables the redundant proxy mechanism. 

ƒ

 

[0] 

Disable (default) - Phone doesn't use redundant proxy (default). 

ƒ

 

[1] Enable 

- Phone registered to redundant proxy if the primary proxy does 

not respond to SIP signaling messages. 

voip/signalling/sip/redun
dant_proxy/address 

The IP address or host name of the redundant proxy. 

The default value is 0.0.0.0. 

Note:

 This parameter is applicable only if the parameter 

use_redundant_proxy

 is set to 1. 

voip/signalling/sip/redun
dant_proxy/port 

The UDP or TCP port of the redundant proxy server. 

The valid range is 1024 to 65535. The default value is 5060. 

Note:

 This parameter is applicable only if the parameter 

use_redundant_proxy

 is set to 1. 

Содержание 320HD





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды