36
37
rec
o
rdings
Protecting Data
rec
o
rdings
Protecting Data
How can I prevent someone from tampering with a measurement?
Th
e soundBadge has a password protection function that locks the device during a
measurement. When the soundBadge is locked, ‘LOC’ is displayed and only the ‘!’
over-dose indicator will be shown.
How do I change the passcode?
Press
to advance to the
PEAK
main page. If
PEAKS
is displayed,
press the
repeatedly until the
S
is
removed.
Hold
down for 2 seconds to
display ‘PASS’. Continue to hold
while you press
, the current
passcode (default = 1234) will be
displayed and will fl ash.
Press
again the fi rst digit of the
current passcode will fl ash.
Press
until the new fi rst digit is
correct then press
to advance to the
next digit.
Once all digits are set, press
again, all the digits will fl ash.
Press
to set the passcode and
return to the
PEAK
page (or Hold
for 2 seconds to lock the device with
the new passcode).
How do I lock the soundBadge
during a measurement?
Press
to advance to the
PEAK
main page. If
PEAKS
is displayed,
press
repeatedly until the
S
is
removed.
Hold
down for 2 seconds to
display ‘PASS’. Continue to hold
while you press
, the current
passcode (default = 1234) will be
displayed and will fl ash.
Hold
for 2 seconds to lock the
device. Th
e display will read ‘LOC’
NOTE: You cannot turn off the
soundBadge if it is measuring a dose
and is locked.
If you forget your passcode,
it can be recovered using the
soundView
TM
soft ware from
the device info button.
How do I unlock the soundBadge ?
Hold
down for 2 seconds to display the
default passcode (1234). Th
e fi rst digit, 1,
will fl ash.
Set the correct passcode by pressing
until the fi rst digit is correct then press
to
advance to the next digit.
Once all the digits are correct press
again to unlock.
