background image

SERVICE INFORMATION

SHIPPING DAMAGE

If the shipping carton is found to be damaged, notify the delivery company 
immediately.  Save the damaged carton as evidence for the delivery 
company to inspect.  It is the responsibility of the consignee to file a claim 
with the delivery company for any damage that occurs during shipping.  In 
the case that the shipping carton is in good condition but the unit is damaged 

®

or defective, call 

Audio2000'S

 at 805/523-2759.

FACTORY SERVICE

®

If the equipment needs factory service, call 

Audio2000'S

 at 805/523-2759 

for a Return Authorization number (RA number) and the address of the 
authorized service representatives.  Insure and ship the product, prepaid, in 
its original carton along with proof of purchase in the form of a bill of sale or 
receipted invoice to the above address.  Please clearly write the RA number 
on the shipping carton.  Also enclose a note describing the problem along 
with any other helpful information such as where and how the unit was used.

LIMITED WARRANTY

®

H&F Technologies, Incorporated (H&F) hereby warrants that

 Audio2000'S

 

products will be free from defects in material and workmanship for a period of 
1 (one) year from date of purchase.   At its option, H&F will repair or replace 
the defective product and promptly return it to you.  

The  Limited  Warranty  will  not  cover  any  item  that  has  been,  in  H&F's 
estimation,  subject  to  alteration,  misuse,  neglect,  accident  or  improper 
installation. In addition, any service not performed by H&F or an authorized 
service center will terminate terms of this warranty.  Normal wear and tear of 
this product will not be covered by this or any implied warranty.

No liability will be accepted for damages/loss directly caused from the use of 
this product.  H&F's liability shall be limited to the repair/replacement of this 
product if found to be defective.

© 2013 H & F Technologies, Incorporated    (website: 

www.audio2000s.com

)

-

14

-

Содержание AWM6951
















Отзывы: