7. Turn both audio level adjustment knobs all the way to the minimal audio
position. (
Note:
The audio level adjustment knobs will be adjusted to its
optimal position after the transmitters are turned on as discussed in the
following section.)
If the supplied 12VDC adapter is to be used as the power source, turn the
On/Off switch to the upper position (position I). After the power On/Off
switch is turned to the upper position, the blue 12VDC power LED
indicator (refer to numeral 2 on pages 6 and 7) will be turned on.
If the AA-battery power is to be used as the power source, turn the power
On/Off switch to the lower position (position II). After the power On/Off
switch is turned to the lower position, the red AA-battery-power-supply
LED indicator (refer to numeral 3 on pages 6 and 7) will be turned on.
After the AWR6951 receiver is turned on, the LCD on the front panel will
display the current receiver state.
C. Set up the transmitters
(a) Set up the handheld transmitter
1. Open the battery cover (refer to numeral 20 on pages 8 and 9) of the
handheld transmitter by firmly pushing the battery cover to the direction
away from the microphone windscreen (refer to numeral 16 on page 8).
2. Place two 1.5V AA batteries into the battery housing with the battery
polarity orientations as indicated.
3. Push the battery cover in the direction toward the microphone
windscreen until it clicks to close the battery cover.
4. Turn on the power of the handheld transmitter by push the On/Off switch
in the direction toward the microphone windscreen. The green LED
indicator will blink once and stay off (If the green LED light stays on, the
AA batteries need to be replaced).
(b) Set up the body-pack transmitter
1. Open the battery cover of the body-pack transmitter by pushing the latch
button (refer to numerals 32 & 33 on pages 9 and 10) inwards (There is a
concaved opening and the latch button is at the lower side of the
opening) and flipping open the battery cover.
2. Place two 1.5V AA batteries into the battery compartment with the battery
polarity orientations as indicated.
-
4
-
