V1.4
LF Cut
Accessing the LF Cut menu allows the user to select any one of five
LF cut settings to maximize the rejection of undesirable low
frequency noise. Any one of five LF Cut settings, ranging from 50Hz
to 200Hz can be selected.
RF Power
Three power settings can be selected to suit the environmental
conditions. The three power settings are 5mW, 20mW and 50mW.
Display
menu
To change display parameters enter the display menu. Entering
display menu allows the user to change the brightness and the
screensaver timer.
Brightness
The brightness of the OLED screen has 5 adjustable settings.
Screensaver
The screensaver can be switched off completely or it can be set to time
out after 5, 30 or 120 seconds. This reduces power consumption.
Encryption
The 1010 system allows the encryption of the transmitted signal to
ensure the complete privacy of the particular transmitter receiver
pairing. The encryption menu allows the user to generate a secure 4
digit key.
Key generator
Entering the encryption menu allows the user to generate a secure 4
digit key. This 4 digit number is then entered manually in the DX1010
receiver.
System
menu
Select System to enter the system menu.
Info
Enter the Info screen to read the parameters for the transmitter.
Parameters include the serial number, firmware issue number and the
frequency banding of the transmitter.
