V1.4
Recommended Mounting
The TX1010 transmitter is supplied with a neoprene pouch for attaching the transmitter to a
belt or waist line of trouser or skirt. This accessory ensures that the transmitter meets RF
Exposure guidelines. Other body-worn accessories used with this device must meet the
following requirements in order to comply with RF Exposure guidelines:
-
Made of non-metallic material
-
Transmitter orientated in vertical plane at waist height
-
Maintains a minimum separation distance of approximately 7mm from body
Batteries
Upon finishing with any used batteries please dispose of them as special waste. In order to
protect the environment, only dispose of exhausted batteries.
TX1010 Frequency ranges
The TX1010 transmitter can tune over a switching bandwidth of up to 100MHz. The
frequency ranges are listed below:
470.2-547.8MHz
518.2-607.4MHz
594.2-693.8MHz [Europe only]
Please note that frequency range 608 – 614MHz is forbidden for use in US.
FCC Conformity
This device with its antenna complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. The device must not be co-located or operated in conjunction
with any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules: Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Caution:
Changes or modifications not expressly approved by Audio Ltd could void the user’s authority
to operate the equipment.
