manualshive.com logo in svg

Audio Technica ATDM-1012, Руководство пользователя

Поделиться
Скачать
Audio Technica ATDM-1012 Скачать руководство пользователя страница 29

29

Setting the audio input details

Turning the compressor ON/OFF

Switch the compressor between ON and OFF for each channel. This 
setting can be made only when the compressor module is assigned.

1.  Click “CMP/FBS”.

2.  Select the check box next to the channel(s) to which it will be 

assigned.

3.  Click the area in the red box on the screen shown below.

•  The setting is turned ON (blue)/OFF (no color) each time the switch is 

clicked.

Turning the FBS ON/OFF

Switch the FBS (feedback suppressor) between ON and OFF for each 
channel. This setting can be made only when the FBS module is assigned.

1.  Click “CMP/FBS”.

2.  Select the check box next to the channel(s) to which it will be 

assigned.

3.  Click the area in the red box on the screen shown below.

•  The setting is turned ON (blue)/OFF (no color) each time the switch is 

clicked.

Содержание ATDM-1012

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды