manualshive.com logo in svg

Audio Technica ATDM-1012, Руководство пользователя

Поделиться
Скачать
Audio Technica ATDM-1012 Скачать руководство пользователя страница 11

11

About Dante (ATDM-1012DAN only)

ATDM-1012DAN supports Dante network audio.
ATDM-1012DAN audio can be output to a Dante device or audio from a Dante device can be input to ATDM-1012DAN.
For more details on Dante network audio, refer to the Audinate website at www.audinate.com.

Network port mode settings

Performing settings from the ATDM-1012DAN unit

1.  Turn the dial button on the Home screen to select “Set” and then press the dial button.

2.  Turn the dial button to select “System Setting” and then press the dial button.

3.  Turn the dial button to select “IP Setting” and then press the dial button.

4.  Turn the dial button to select “IP Port Set.” and then press the dial button.

5.  Turn the dial button to select “IP Config Mode” and then press the dial button.

6.  Turn the dial button to select “Auto”/“Static” and then press the dial button.

7.  Press the power button to restart the product.

Performing settings via Web Remote

Refer to “Network in System Settings”(P.48).

 

• Settings can also be changed via the Dante Controller (application from Audinate). For information on the Dante Controller, refer to the 

Audinate website at www.audinate.com.

Содержание ATDM-1012

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды